As a long term provider of GMPLS technologies, Marben has been building pre-profiled MPLS, OIF or GMPLS-based applications for its major customers among the largest equipment vendors. Starting from MARBEN protocols and MARBEN Development kits, Marben has built such application as a set of high-level libraries built on top of MARBEN Signaling and TE development kits to reduce the time to market for smaller equipment vendors and to get a competitive and interoperable GMPLS based solution embedded into any Network Element.
It consists of three modules:
mainly manages Setup and teardown of calls and connections. It invokes services from the Routing Controller and the Link Resource manager to achieve such a goal.
mainly manages Path computation capabilities using the traffic engineering information running IS-IS or OSPF routing protocols or using remote PCE server.
performs local TE-Links management.
These controllers provide
These controllers are quasi agnostic to the transport technology - WSS, OTN SONET/SDH and connected Ethernet. These are dedicated to be embedded into MSPP, Metro and Core Cross connects controlling such relying transport technologies.
Built with a high level interface that reduces time to market and cost for such advanced control plane features.
Proven and deployed solution that strongly reduces interoperability matter on all elected GMPLS protocols.
Developed in C language (with ANSI C and K&R support), MARBEN stack is portable on 32 and 64 bits system platform. Off-the-shelf support is provided for:
Optimized memory management. All data buffers are exchanged without memory copy within the stack.
Support of thousands of call connections or hundred of thousands LSPs.
Integrated testing facilities: all protocol layer interfaces can be exercised through command lines or scenarii.
Extensive tracing facilities: traces of activity can be activated on each service access point and dump of connections can be requested.
Extensive configuration at load time and run time. Most of the stack and protocol layer parameters can be modified after compilation and while the stack is up and running.
Administrative interface is provided for the user's management application. A command line interface tool is provided to access all levels of configuration and tracing.